dmanars

Peeps,
Is it the Tokico struts you have to modify your suspension to fit them. I read it somewhere you hade to cut and drill. But I can't remember what brand. I'd apperciate the help Thanks

knock_it_off_hudson

From other posts I've read I believe it's Koni you have to mod. Tokicos should fit fine.

johnand

Tokicos are a direct bolt in. The koni inserts need modifications to your stock strut housings to install. You can follow the link to my website for info on installing the Koni's.

__________________
1991 Sentra SE - Auto to Manual swap, 15" Rota Subzero's, 205/50 Kuhmo 712's, Tsuru headlight conversion, SE-R front and rear disc brakes, SE-R front and rear swaybars, SE-R throttle body, SE-R rear inner taillights, HS CAI and Header, H&R springs, Koni shortened struts, ES Hyperflex kit, B&M Short Shifter, Autometer gauges.

schauhan

I replaced stock struts with tokico a month ago in my 91 sentra xe, no modification was needed, they are direct bolt in, even it did not cause any camber problem, runs like a charm.