Big Brake Kits for Sentra - Page 2

SE-RMadness · May 2nd, 2002, 12:43 PM

As long you get bigger Rims.. I dont see why not.

May 2nd, 2002, 04:09 PM

I have the Fastbrakes kit on my car... they make a big difference. I think your kits use Dynalite 4 pistons, though. You just have to pay more attention to them because they don't use outer dust boots.

Wouldn't it be cheaper to go to the junkyard and get 4th Gen Maxima calipers/rotors? My stock were 11" rotors... Should be more than enough for your lighter cars. I think most Nissan FWD bolt on without much problems... though I haven't personally done this swap.

**morepower2** · May 2nd, 2002, 05:37 PM

Quote:

Originally posted by Chunger
I have the Fastbrakes kit on my car... they make a big difference. I think your kits use Dynalite 4 pistons, though. You just have to pay more attention to them because they don't use outer dust boots.

Wouldn't it be cheaper to go to the junkyard and get 4th Gen Maxima calipers/rotors? My stock were 11" rotors... Should be more than enough for your lighter cars. I think most Nissan FWD bolt on without much problems... though I haven't personally done this swap.

Caliper offset and bolt center to center are wrong as is the rotor bolt pattern.

Mike

**morepower2** · May 2nd, 2002, 05:38 PM

Quote:

Originally posted by Adam
So this should work for a B13 too right?

Yes!

Adam · May 2nd, 2002, 09:44 PM

Quote:

Originally posted by morepower2

Yes!

Damnnit, there are way too many tempting mods out there that I want and would automatically take me out of STS! It's good to know though cause once I get my cage in the next month or two I'll certainly need them for track use.

SE-RMadness · May 2nd, 2002, 11:13 PM

Well, you should get way better stopping power then the NX Upgrade.

May 5th, 2002, 04:22 PM

keep us posted on the b15 applications

CarbonBlack200 · May 5th, 2002, 07:48 PM

Brembo has beautiful brake kit for B15s. oh, but they are very $$$...

TheNatrix · May 8th, 2002, 05:27 PM

Ok, so someone asked if this would fit the b13... Well, was that just the SR20 or would that also fit the GA16? Or is there even a difference between the two?

**morepower2** · May 8th, 2002, 06:07 PM

Quote:

Originally posted by TheNatrix
Ok, so someone asked if this would fit the b13... Well, was that just the SR20 or would that also fit the GA16? Or is there even a difference between the two?

The brembos won't fit they are way too big, only B15.

mIKE

SE-RMadness · May 8th, 2002, 08:15 PM

What if you get bigger rims?

May 9th, 2002, 02:20 AM

any slotted application for the b13? i prefer slotted or drilled then just plan solid.

myoung · May 11th, 2002, 02:52 AM

We will have a lot more info on Fastbrakes in the coming month as we install kits on both Project SE-R Turbo and Project 200SX

Check this months NPM for a little info...

http://www.nissanperformancemag.com

Michael

**morepower2** · May 12th, 2002, 06:43 PM

Quote:

Originally posted by SE-RMadness
What if you get bigger rims?

No they stick out way too much for almost all rims, except for maybe some crazy spoke 17 or 18 inch rims.

Mike

nismo91 · May 15th, 2002, 11:23 AM

Hi Guys,

I was part of the initial group buy for Fastbrakes Someone had installed their 11" kit and posted the pic.

Before

After

I have bought the 11" Heavy Duty Slotted rotor. I was told that I didn't have to change the MC. The owner of the picture posted above did not have to replace his MC. You just need to properly bed the rotor, I was told, and it would be fine. The brake pedal will be firm.