ijbandman

Since no one knows what a crak angle sensor is, is there anyone out there that can help me finish my SR20. It's in, all that needs done is the timing and two vacumn hoses ran. I live near Morgantown, Wv. About 2hrs from Oio and 1 hr from PA. Will pay for time and travel. call 304-612-7787

HybridAndy

I've got a buddy with a shop in Youngwood PA (reasonable, maybe hour drive from morgantown) who's done quite a few rwd SR20 swaps and their mechanic (his name's Jay) has a nice one that just ran 11.1 a couple of weeks ago. The shops called Hybridynamics and their number is 724-925-2660, tell them Andy sent you. I don't know if they'll travel to see you but they might be able to help you over the phone or tow the car up here and fix it. Give them a call, their good guys.

ijbandman

Thanks Bud, You don't how much this means to us. My son and I both have swapped as many as 15 Honda and Acura motors. I have a 2003 350Z myself. But this is our first Nissan project. The motor's in along with the tranny, But we are two vacumn lines and timing (crank Angle sensor) away from getting this thing running. We have a company called team xtreme motorsports. If you every need anything, it's yours at our cost thanks for all your help. I can pick up an SR20 redtop S13 for you if you ever need it for 2600 bills from McKinnney Motors if your ever in the market. But that's your price, my cost. Let me know if there is anything you need.
Mike

HybridAndy

Cool, I guess you got a hold of them. I might take up your offer on some parts later once I get my clip in and see what exactly I need. You have an email address I can send a list to or something. Hopefully you got everything worked out.

__________________
HybridAndy - 240sx/SR20 owner

'90 240SX hatchback - 180sx front clip on it's way, project car
'98 Civic EX - CTR headlight and grill, Kosei K1's, daily driver

ijbandman

ijbandman@yahoo.com is my email. Called Jason and talked a good while. We're taking my son's 240sx up car this Thurs. He also is also giving me a price to put on a Greddy Turbo on my '03 350Z. He said on the 240, between $300-500 to put on the intercooler and hoses, cut out the fender well and set timing and other extra stuff. Also my son said next time his buying the whole front clip. Save from cutting into the fender well. The motor came from McKinney but they left alot of extras out that we had to buy and didn't state about the tite fit, but then again, if you buy the motor, you should know what your geting into, I guess. But they do sell good motors with low mileage and good warranty. I think this one has 23,000 on it. But We're like Jason, except we do alot of Honda/Acura swaps. Alot different then Nissan. This is our first one. But we will learn to do them from now on. If you know of anybody needing a Honda/Acura swap, pass on our name.We swapped out a Type R in a 94 Acura and 98 Civic and we are direct dealer for Jackson Raccing Superchargers. Thanks again.