Help finding GTI-R SR20DET Internal parts

Feb 7th, 2003, 05:18 PM

I am having trouble locating parts for my Nissan Sentra GTI-R (1991 Sentra SER w/ GTI-R SR20DET Engine)

I need a Head Set or Gasket Set, Metal Head Gasket, New Valves and RAS.

(i think it dropped a valve, so i need to pull the head and take care of it; ~30 psi on #3cylinder, no blow-by)

I emailed several tuners, JspecUSA, Phase2MotorTrend and HeavyThrottle, two have no clue about the GTI-R the other hasnt responded.

Im pretty sure its an N13. Red Top.

I already searched the forum, no significant results.

Are the parts I need the same as an S13 SR20DET?

P11GT · Feb 8th, 2003, 12:30 PM

if you are still having trouble getting hold of any locally, you could try www.hiteq.co.uk http://www.norrisdesigns.com/ http://www.dpmotorsport.com/ or http://www.middlehurst.co.uk/ which is a Nissan Main Dealer that supplies the GTR in the UK

Feb 19th, 2003, 08:42 PM

I did some research and found out its an "RNN14". I also talked a little with dpmotorsport, they seem to be familiar with GTI-Rs.

Well, If I dont hear$anything soon, I'm going to get an SR20DE Gasket Set and a Metal Head Gasket for S13. Then I'm going to tear the head off, repair it, and see myself which gaskets are going to work for me. I will let you all know the results.

I miss my 308HP to the wheels.

For those not familiar with the GTI-R, its an SR20DET found in the AWD Sunny or Pulsar GTi-R. But it has quad throttle bodies, stronger main cap bolts, stronger rods, top mounted intercooler and a T28 Turbo. (all stock!) It fits nicely into a Sentra or 200SX SE-R. I also have a bigger front mounted intercooler, water injection, BB T28, JW ECU, and MSD on mine. Dynoed at 308HP to the wheels, and did 13.4 1/4 mile. Im sure it can pull 12secs. on slicks (those streets tire were smokin for the first 100ft!)

-flameone