alright fellas,
i have been getting a 3,2 code ever since I bought this car in july. anyways, it had an obx header installed prior to buying I tried reseting the ecu a few times, no luck. Solast weekend I bought a gasket and took the egr manifold off cleaned out the black stuff, when i was taking off the egr and bpt valves I noticed the bpt hose was off so I put it back together, reset the ecu again, the cel came back! then i looked at the bpt tube and notice that it looked like someone welded a section on the tube i just want to know if this tube looks normal... so here is a picture. also any idea suggestions would help alot
-T
Sorry the picture is big...
Linear Mode
