keeeeeef

Hello yall

I have a N14 pulsar/sentra powered by GA16DS
I can lay my hands on a SR16VE which is not common here in new zealand,I beleive I will be the first here in NZ to think of such a transplant.So information is rather vague.

The engine is sourced out of a JN15 pulsar/sentra
What I want to know is what do I have to change...apart from all of it.
Is the block different to the SR18DE which is very common here?
So I was thinking of using all the mounts and NTH/STH beam from a SR18 powered sentra.
Are the bell housings different between the VE and DE?
as the N15 has an electonic speedo sensor and the N14 has cable.

Any info/links GREATLY apreciated
cheers keith

onyxeros

The 16ve is the same as the 20ve the only difference is the rod/piston ratio. So the engine will bolt up to an SR20de transmission. nothing else that I know of

go over to www.sr20deforum.com and READ THE STICKY!!!!!!
O

__________________
Gentleman's agreement
1.8L
200whp

toolapcfan

Like he said, read this FAQ:

http://www.sr20deforum.com/showthrea...threadid=18317

__________________
Rob '93 SE-R

PM or e-mail me for Progress swaybars $190 shipped, B13 Progress coilovers $1300 shipped and B13 Progress LCA brace $160 shipped.