would anybody happen to know exactly what stock cylinder compression should be for a 95 200sx se-r? i tested mine last night and starting from left to right (facing the engine) it was 175 psi, 171 psi, 178 psi, and 178 psi. i'm guessing this is pretty good, but not sure, because of how many miles i have. engine runs real strong, i raced a 95 se-r with est. 29,000 miles on it a few weekends ago, from a 2nd gear run, us both having basically the same mods, except for my exhaust being 2 1/4" crush bent and his being catback hks, and i was pulling on him without shifting at redline, where he was shifting at redline. not to shabby huh? and i pulled my oil pan and replaced the gasket the other day and much to my surprise there was no metal in the pan or oil at all. just pulled all of my a/c equipement off the car tonight and that seemed to make a little difference. anyway back to the original question of stock cylinder compression. if anybody happens to know, i would appreciate it. i did do a search on se-r.net and this forum and didn't find anything. thank you. kyle
Linear Mode
