I read in one of the magazines that I picked up that there was a way to mesh a rb26 to a rb25 tranny...I would love to know how to do this if its possible. I've heard rumors that the RB26 can hold 700 or so hp without rebuilding the internals...I just think that's cool.
__________________
Let me rest in pieces... Godspeed and Mazdaspeed with you....Women, you can't live with them...you can't kill them... If you're gonna do it, do it right. If you're gonna talk be prepared to walk or get trampled in the run.
It's been done in Japan. I don't know if the 25/26 combo has been done in the US or not , but yes , it will work , and is essentially the only way to put an RB26 into a RWD application. The RB26 and RB25 blocks are the same , so the tranny will bolt right up.
__________________
1992 Yamaha FZR 1000. 145 Hp, all stock..
i think they use rb25 trannies when swapping a rb26 into s13/14's. the reason being that rb26dett trannies are awd and to fabricating the rb25 tranny is a lot easier/cheaper than fabricating the rb26 tranny to fit.
Did you swap the rb26 in yourself or did you have a shop do it? Know any really good shops to do something like this?
__________________
Let me rest in pieces... Godspeed and Mazdaspeed with you....Women, you can't live with them...you can't kill them... If you're gonna do it, do it right. If you're gonna talk be prepared to walk or get trampled in the run.