S14 sr into a s13 hybrid swap

zellx2004 · Jan 11th, 2005, 11:46 AM

I've searched everywhere. Does anyone know where I can find a guide on a s14 sr engine to a s13 chassis hybrid swap? I've finished my research on the wiring, and my wiring is NOT CUT! The s14 just has different connectors. Anyone know of any sites? Thanks.

Nismo14-180 · Jan 11th, 2005, 03:29 PM

Couldn't you get an S13 harness, and take the plugs off of them. Then adapt them to the S14 harness?

I think Phase2Motortrend has a S14 SR to S13 hybrid harness. Probally wrong though.

zellx2004 · Jan 11th, 2005, 04:34 PM

Quote:

Originally Posted by Nismo14-180

Couldn't you get an S13 harness, and take the plugs off of them. Then adapt them to the S14 harness?

I think Phase2Motortrend has a S14 SR to S13 hybrid harness. Probally wrong though.

Yes, I can. But I don't know which wires go where. The plug to the s14 harness has 5 wires, while the two plugs from my KA harness have 8 wires in one, and i think 7 wires in the other. I've already asked Heavythrottle, Phase2, and Mckinney Motors.

Phase2 said: You probably need a new harness. What the hell? i already have both complete harnesses.

Mckinney said: Need to completely rewire.

Heavythrottle said: They do not specialize in N/A SR20 engine wiring harnesses. Their excuse was, "There is no way we can test the harness to make sure it works." this sounds logical, but my problem still isn't fixed.

Nismo14-180 · Jan 11th, 2005, 07:32 PM

Have you tried to find online factory sevice manuals? My friend did a while back for the SR20DET-all generations, KA24DE- all gen., and even the CA18DE & CA18DET. I'll talk to him and see if the site has the SR20DE on it as well. if it does I'll give you the site.