I dont think so, not without some rail work. 300zx doesnt have the floorpan lump that the silvias and skylines have resulting in height offset seat rails
anybody know where i could get a 180 seat. i didnt really like the 240 seats when i saw them...a little to narrow looking and uncomfortable, whereas the 300 seats fit me perfect and are really comfortable.
well u can try ebay or ask people on this forum which u did already. personally i think it be less hastle getting a 240sx or 180sx seat then putting a 300zx seat. cause those seat bolt right on and the 300zx u will had to make some modification like joel said
Something someone should try/look at for some seat upgrades is see if the stock 240 rails can bolt to the seat of say the 300z seat, or the skyline seat (sense only 3 of the 4 bolt up corectly). that way you could keep the stock rails, but have a better seat. i know i have fully disasembled my seats to swap the bottom and back with the passenger side so i know it can be done.
__________________
Black 1990 FB
KA24e Built for Turbo /w other bolt-ons here and there.
Something someone should try/look at for some seat upgrades is see if the stock 240 rails can bolt to the seat of say the 300z seat, or the skyline seat (sense only 3 of the 4 bolt up corectly). that way you could keep the stock rails, but have a better seat. i know i have fully disasembled my seats to swap the bottom and back with the passenger side so i know it can be done.
i was thinkin the same
considering i already have the 300 seat i might try that
already. personally i think it be less hastle getting a 240sx or 180sx seat then putting a 300zx seat. cause those seat bolt right on and the 300zx u will had to make some modification like joel said
Linear Mode
