2001 Sentra SE with 1.8 not firing on two cylinders - Nissan Forum
QG18 1.8L Engine Engine Discussion: 2000+ Sentra XE, GXE, & 1.8

 
LinkBack Thread Tools Display Modes
post #1 of 4 Old Apr 30th, 2011, 06:42 PM Thread Starter
Tmo
NissanForums Newbie
 
Joined: Jul 2010
Posts: 4
2001 Sentra SE with 1.8 not firing on two cylinders

My bil has a '01 Sentra with the 1.8. It's not firing on two adjacent clyinders, 3 and 4 I believe. Coil packs are okay, compression is okay, new crankcase and camshaft sensors, PCM has been changed out - to no effect - still no fire on those two cylinders. One mechanic mentioned an ignitor box. Does this car have one and where is it locate? Any help is appreciated. Thanks.
Tmo is offline  
Sponsored Links
Advertisement
 
post #2 of 4 Old May 6th, 2011, 12:30 AM
NissanForums Newbie
 
Joined: May 2011
Posts: 4
have you checked the wiring from the coil packs to the pcm?
automech01 is offline  
post #3 of 4 Old May 6th, 2011, 06:56 AM Thread Starter
Tmo
NissanForums Newbie
 
Joined: Jul 2010
Posts: 4
We moved the coil packs from cylinder to cylinder and it was still misfiring on the same two cylinders. We also replaced the wiring harness.
Tmo is offline  
post #4 of 4 Old May 6th, 2011, 10:52 PM
NissanForums Newbie
 
Joined: May 2011
Posts: 4
the igniter is part of each coil you need 4 things to fire a cylinder 1st air is it getting air in and out, air filter clean and no plugged exhaust plugged egr passages that can contaminate the air charge check for a lean misfire possible blown intake gasket . 2nd gas have you checked for injector pulse at all 4 injectors and the injectors them self's. fresh gas and at least 35lbs of fuel pressure. 3rd compression at least 60lbs and and or all the same psi 4th spark have you checked each coil for power and ground and when i say ground i mean the ability for the pcm to pulse each coil have you checked the reluctor at the crank sensor sometimes they get damaged missing teeth or bent
automech01 is offline  
Sponsored Links
Advertisement
 
Reply

  Nissan Forum > Sentra, Pulsar, NX, B14 200SX > QG18 1.8L Engine

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Nissan Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter you desired username.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome