1994 Pathfinder SE Blower Noises & Glove Compartment Removal

DVD7000 · Dec 25th, 2012, 01:07 AM

Would like to know how to get at the blower motor assy. on my '94 Pathfinder SE. I saw a You Tube video on how to remove the glove box, but it was for a 2005 model. Mine might be a bit different. Afraid to use the same method as the pins look like they may break if I apply too much pressure.

All 4 fan speeds work, but as the fan speed increases, there's a rattling noise that also gets worse. I'll probably want to replace the cabin filter(s) too.

SPEEDO · Dec 27th, 2012, 08:10 AM

I dont see hinge pins on that year...
the metal backing has screws & clips that hold it in
I dont believe a 94 has a "in-cabin filter"

DVD7000 · Dec 28th, 2012, 12:56 AM

Quote:

Originally Posted by SPEEDO

I dont see hinge pins on that year...
the metal backing has screws & clips that hold it in
I dont believe a 94 has a "in-cabin filter"

Thanks. Was able to remove the 2 side pins as they're just held in by friction. After that the rest was fairly straight forward. Turns out the noise was leaves and other debris in the blower motor. Also cleaned out the junk that was in the resistor compartment.

SPEEDO · Dec 28th, 2012, 08:04 AM

might want to pull the cowl grilles (between the hood & windshield) and clean out that also (it is the air intake for your heater/ac fan) may need to replace the clips (oem pt# 66814-01G00) takes 3 per side..