Staylong

HI

I am sure this has been asked many times but please excuse if I ask again.

I am taking out the Clarion sound system in my 1995 Pathfinder. With help from different sources on the net including here I located the amps at the back right rear.

I have traced all the wires to the speakers and back to the head unit plugs. Ready to install new system.

What I would like to know is that attached to one of the brackets holding the two Clarion Amps is a plastic box. About 3" x 3" x 1.5". What is it?

No connections seem to go from the box into any of the amps. It wont bother me to just leave it there and put the plug back in but I would like to know what it does.

Any ideas please.

Many Thanx

Staylong

tcrote5516

Factory Subwoofer? LOL, I dont really know. Download the manuel, there is a great breakdown of all electrical in the last section.

__________________
95 Pathfinder
80" of Lift (if you ask a state trooper)
22" of LCD screen
Reverse Camera
Winch, Brushbar, custom bumper
Safari Rack w/510w Aux Lighting
FULL Custom Leather and Crushed Velvet Interior
Check It out at : http://www.cardomain.com/ride/2491299

golfer

The A/T control unit is located in that area so you better leave it there plugged in.

88pathoffroad

The TCU is a gold metal box with two plugs. I dunno about a plastic box back there. If it's attached to the same bracket as the amps, I'd say it was something stereo-related. Could it be a crossover network box for the separate tweeters?

__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.

golfer

going by this diagram

Staylong

Thanks everyone for the help.

Golfer this is the exact area. Bottom right. What is puzzling me is that I see the small amp on the right that says 'front speaker amp. I found three units, two are alloy with heat sinks and I was able to trace all the speakers from these two. The larger does drive the rear speakers and I presume it puts out 2.4 ohm. The other one shown in the pick is alloy as well and drives front 4 ohm. Then just behind that bulkhesd and attached to the smaller amp is this small plastic box. Cant see where the wires go as everything is wrapped in black and going into the harness.
I have ended up leaving it in place and put the cable plug back in.
I have already by passed the amps and joined the wires so that everything is running from the head unit.
Think it could be as suggetsed a cross over for the tweeters.

Love to get a download of the manual as also suggested. Where can I get that?

Cheers again. Hope It works tommorow when I do final fit.

Staylong