msavides

Was wondering if there are any stainless Cat Back systems on the market that a home user can just bolt on. I want to eventually do the whole exhaust and replace the manifold with headers but for now my muffler is coming off and need to get a replacement. I like the idea of everything being welded up and just bolting it on the the cat converter.

Thanks in advance


Mark

88pathoffroad

Borla makes one, IIRC. Stainless is gonna be spendy, though.

__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.

littlefish

Last summer I replaced everything starting at the back of the converter on a 90xe v6. Cost for 3 inch aluminized bent tubing was $130 including a new low restriction muffler. This was the installed total price. This was in Houston south of Hobby airport. Just be sure they install it where there is enough clearance between the rear axle and the pipe when the springs are compressed. Makes a hell of a bang and rattle when it hits.