UNPIMPED

I just factroy 7 pin wiring for my new 07 Pathfinder. What kind of controlers are you peeps using ? My trailer is a pop up travel trailer that weighs in at about 2500 lbs. I will also tow a car hauler sometimes at about 4-5k.

__________________
2007 Pathfinder "S"
2002 VW Passat 1.8t w/mods
1985 Porsche 944
1979 MG Midget
1967 MGBGT
1962 MGA 1600 mkII
1958 Bugeye Sprite

 

Triffid

I use the Tekonsha Prodigy Tekonsha
You can also get the plug and play wiring cable to plug the controller into the Pathfinder Tekonsha... Very easy and they work great!... I use this controller on My '05 Pathfinder and my Chevy 2500HD... Hope this helps!......... Triffid

__________________
2005 NISSAN SE OFFROAD PATHFINDER
VIEW MY ALBUM/MODS

boogyman

I think you need a relay for the brake controller also. They only installed it on the '05 and saved a buck on the '06 and up.

This is from Courtesy parts info
Nissan factory replacement electrical Relay. Nissan part numbers 25230-79964 and 25230-79963.
2006 and newer year model Nissan Pathfinder with a VIN ending in -763841 and higher
(If your Titan or Pathfinder has a Nissan trailer hitch, this relay is sold as a replacement.
For aftermarket (Non-Nissan) Trailer Hitch this relay can be added to the trailer power braking system)

__________________
'05 Pathfinder LE
'03 Saab 93SS

UNPIMPED

Thanks guys! Where have you mounted the controler? Any pics?

__________________
2007 Pathfinder "S"
2002 VW Passat 1.8t w/mods
1985 Porsche 944
1979 MG Midget
1967 MGBGT
1962 MGA 1600 mkII
1958 Bugeye Sprite

Triffid

I installed mine in the pocket above the 4wd selection switch... The plug-in connection for the brake controller is behind the panel above the drivers right leg... My '05 already had the relay installed but the newer ones you will have to add it... I'll try and take some pictures this weekend............... Triffid

__________________
2005 NISSAN SE OFFROAD PATHFINDER
VIEW MY ALBUM/MODS

 

tcrote5516

"you peeps" ummm hmmmm....

__________________
95 Pathfinder
80" of Lift (if you ask a state trooper)
22" of LCD screen
Reverse Camera
Winch, Brushbar, custom bumper
Safari Rack w/510w Aux Lighting
FULL Custom Leather and Crushed Velvet Interior
Check It out at : http://www.cardomain.com/ride/2491299

88pathoffroad

Trailer wiring controllers are so small that most just get tucked under a wall panel and hidden. Most cost $20 or so anyway, what's the big deal? I've got three or four of them from the junkyard in my garage...

__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.

blink32

I'm using a Tekonsha also. I have mounted like so.

88pathoffroad

Oh I see. A trailer BRAKE controller. I was referring to simple wiring converters for the rear end.

__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.