Quote:
|
Originally Posted by dev_atl
I am trying to figure out a good spot to run the power cable for the AMP through the firewall. I looked on the driver's side and there is already a hole there but it is covered up with a metal plate. Once I remove the plate, the hole is blocked by a metal bracket, I thought about drilling a new hole but there is no room for me to fit a drill anyplace where there can be a hole. I found a grommet in the center (right next to gas pedal) but it is hard to get to from under the hood.
Any help would be much appriciated.
|
Crawl under the truck, If I remember correctly that grommet by the gas pedal is pretty easy to get to from the bottom. Remember there isnt allways an "easy" way to do this, it can be a pain in the ass no matter where your run it. Find a clear place to drill with nothing on the otherside, and push a wire through, then fish around for it. Its not an exact science.
__________________
95 Pathfinder
80" of Lift (if you ask a state trooper)
22" of LCD screen
Reverse Camera
Winch, Brushbar, custom bumper
Safari Rack w/510w Aux Lighting
FULL Custom Leather and Crushed Velvet Interior
Check It out at :
http://www.cardomain.com/ride/2491299