Hi. Im having problems with regards to my fuel and temperature gauge. Sometimes it works and sometimes it does not work. I have checked all the fuse and grounding wires and all seems to be fine. I would like to ask if anybody have experienced this before?
__________________
1993 Nissan Terrano (JDM), 31X10.5 Cooper STT Armortek over 8.5X15 AMS alloys, Carr steps, 3" custom lift front and rear
There is an 8V voltage regulator behind the gauges that runs those gauges in particular. They go out from time to time. You can get a regulator from an electronics supply store for about $2.
__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.
Thanks 88pathoffroad, do you have a schematic diagram which I could look for that voltage regulator? Or perhaps a picture on what to look at? Thanks in advance.
__________________
1993 Nissan Terrano (JDM), 31X10.5 Cooper STT Armortek over 8.5X15 AMS alloys, Carr steps, 3" custom lift front and rear
__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.
__________________
Admin of NPORA, mod for Nissan-Infiniti Forums, NissanForums.com, NissanHelp.com, AllNissans.com and VGPowered Forums
'88 Pathfinder: 6" of lift, 33x13.50 Swamper LTB's, Rancho 9000's, L&P Stage 3 steering system, K&N, Pacesetter headers and 2.5" exhaust, Lock-Right locker, 110A alty and electric fan swap, dual batteries, 700W+ worth of PIAAs, etc.
Linear Mode
