Katana200sx

just wanting to know if the mickey thompson et slicks, size 23 x 8 x 15 will fit on stock b14 se-r rims. thanks all

__________________
Need parts?
91 SE-R Partout http://www.nissanforums.com/classifi...uct=4757&cat=6
96 200SX SE Partout http://www.nissanforums.com/classifi...uct=4756&cat=6

se-r-57

www.mickeythompsontires.com

__________________
94 se-r saphire blue with lot's of crap
I'm just a monkey. I don't know shit.
In the white SE-R when the AMG benz did the ricer fly by on 408 :)

TurbochargedSER

They should fit! How much HP are you planning on making? You may want to look at getting some Classic Wheels and either some 20x8x14 slicks or I know they used to offer the 22x8x14 slicks, but I am not sure if they are discontinued!

__________________
Louis Anaya
1992 Nissan Sentra SE-R Turbo
349.6 HP & 301.9 FT/LB
12.0 @ 118.77 MPH

1994 Infinit G20T
*Daily Driver*

SR20 Performance
www.sr20performance.com
480-966-SR20
480-966-0100 Fax

Katana200sx

not quite sure how far my project will go. right now u could basically say it's stock since i have only a few performance mods. but i figured i could go ahead and buy some good slicks bc i spin like crazy off the line. i think my 60' could seriously drop 2-4 1/10's if i could get traction. too if later on down the line i get some serious mods, i will already have something that will hook.

__________________
Need parts?
91 SE-R Partout http://www.nissanforums.com/classifi...uct=4757&cat=6
96 200SX SE Partout http://www.nissanforums.com/classifi...uct=4756&cat=6

Katana200sx

just thought i would let you know also that your website doesn't work

__________________
Need parts?
91 SE-R Partout http://www.nissanforums.com/classifi...uct=4757&cat=6
96 200SX SE Partout http://www.nissanforums.com/classifi...uct=4756&cat=6

AaroNX

You need to use 20x6x14's or 20x8x15's. If you want you can use the 22x8x15.