2000 altima speedo and tach

jjfcars · Feb 7th, 2008, 06:31 PM

speedo and tach will stop working at any time and start working after it sits for awhile there are no codes showing up already replaced speed sencor where do i start looking also temp gauge will stop working and gas gauge

thanks

samul · Feb 20th, 2008, 02:40 PM

i have similar problem with my 2000 altima, all meters do not work when it is hot.

Mothy · Mar 5th, 2008, 10:33 AM

Quote:

Originally Posted by jjfcars

speedo and tach will stop working at any time and start working after it sits for awhile there are no codes showing up already replaced speed sencor where do i start looking also temp gauge will stop working and gas gauge

thanks

I had fuel gauge go. Replaced sender unit. Still no go. Then all dials failed ninc tach, speedo. Guess what? The interior light fuse was blown. When replaced - all work again. Happened twice. Bizarre. Mothy

altimafan · May 3rd, 2008, 02:59 PM

Hey Guys,

I'm hit with a similar problem on my 2000 Altima GXE 87K miles.
Initially the speedo, tacho and temp guage died while the car was running.
After few days the SES (Service engine soon) light came on when I was in traffic. I got it scanned and got P0500 (Vehicle speed sensor problem), I replaced it myself and also got the SES light reset. Now I'm observing that when I drive the car for sometime (more than an hour), the guages tend to die. (Fuel Guage has no problem, speedo, odo, tacho and temp die, panel lights are ok)

Please reply back with you suggestions as I'm worried if the SES would come back and exact solution so that I dont spend on parts with no results.