Quote:
|
Originally Posted by gfriedman
What was it? 
|
It was that little EVAP vent control valve attached to the charcoal canister. I noticed when I took it off that it was stuck in the open position. This would explain both codes. I examined the valve and found it to have rust and crud on the plunger. I sprayed WD40 in both ports, let drain, actuated the plunger with a small screw driver.......repeated the process many times. I tested the valve using the car battery and it worked perfectly! I put the valve back in and reset the ECU to remove the damn check engine light. The light has not come back on in over a week and it passed OBDII emissions inspection in PA.
If it ever throws those two codes again, I'll probably replace the valve. I found it online for $60 + $10 shipping.