|
The motors are bullet proof. the bottom ends in these things can withstand alot, well built mains and you can rebuild the blocks with new pistons and rings, then hone the block for wear .030. Then port and polish the heads and I believe cams can be bought from JWT. Port the intake and add hi flowing JWT POP filter and intake pipe. Get the headers and exhaust. you can find used Greddy exhausts for these things.
If rust is not the issue, then good, keep the car. Rust in the rear door seams at the corners was an issue. The unibody stands up great. The one issue is that the rear struts are welded into the rear link. not sure why japan did this. You have to install inserts into the old strut bodys. You need ST sways bars also and stillen front tower brace.
The trannys will hold up well, but get the BG service done every year to the tranny and the miles will be OK. if you changed the fluid every year in its life, then good. what I have done is to throw in a bottle of Lucus transmission medic into a 60,000 mile tranny with good results in shift quality.
I wish I still had the old 94 max. great car!
__________________
Part of the AUTO / MANUAL SWAP CLUB
|