|
There should be some FAQs and posts already about this.
Short version
-- remove center console vents: pull them straight out (horizontally) toward you. Do not use excessive force pry them out or move in any other direction except horizontal or you'll snap the clips.
-- remove shifter trim (should snap out, again dont' damage the clips) from the rear, the front part clips in. You'll need to remove the ashtray and stuff as well, I forget if you need to do that before or after the shifter trim.
-- undo 1 screw holding the ashtray frame in, remove it.
-- undo 4 screws, 2 on top and 2 on bottom, holding frame for center console in.
-- undo plugs and screws as appropriate. All the plugs fit only one thing each, they're fully keyed, so if you keep track of what you're doing you should have no problems.
|