Google Links

» Wheel & Tire Center

» Log in
User Name:

Password:

Not a member yet?
Register Now!
Sponsors

Sponsors


Go Back   NissanForums.com :: Nissan Forum > Nissan Models > Sentra, Pulsar, NX, B14 200SX > GA16DE 1.6L Engine
Register Home Forum Gallery Active Topics Search Today's Posts Mark Forums Read

GA16DE 1.6L Engine Engine Discussion: 91-99 Sentra, 95-98 200SX, 91-93 NX1600

       
Reply
 
LinkBack Thread Tools Display Modes
Old Jun 8th, 2004, 12:22 AM   #1 (permalink)
jharris1
Nissan Enthusiast
 
Join Date: Mar 2004
Location: Baltimore (only for school, really from NJ)
Posts: 158
Where is front main seal and how to replace it?

I am guessing it is in the area of the crankshaft pulley, but I am not sure where. I don't think the leak I have is coming from the oil pan. I just changed the oil today and drove from Jersey to Baltimore (about 100 miles), and sure enough after the car settled and the oil pressure went back down, there were oil spots on the ground. I'm not the most mechanically inclined but if someone knows where the seal is, can give specifics on how to get to the seal and what tools are needed, I can fix it.
__________________
93 Sentra E, came with nothing but power steering...

KYB AGX struts, Hyperco Gen 2 springs, Ebay FSTB, lots of 89 gas and TLC :)
jharris1 is offline   Reply With Quote
Old Jun 8th, 2004, 12:30 AM   #2 (permalink)
verno-dub
Nissan Enthusiast
 
verno-dub's Avatar
 
Join Date: Sep 2002
Location: Hawaii
Posts: 130
Quote:
Originally Posted by jharris1
I am guessing it is in the area of the crankshaft pulley, but I am not sure where. I don't think the leak I have is coming from the oil pan. I just changed the oil today and drove from Jersey to Baltimore (about 100 miles), and sure enough after the car settled and the oil pressure went back down, there were oil spots on the ground. I'm not the most mechanically inclined but if someone knows where the seal is, can give specifics on how to get to the seal and what tools are needed, I can fix it.

Soon as you pull of the crank pulley you will see the front main seal. The seal is pressed into the timing cover. You just need basic tools to pull all the splash guards off. As for the crank pulley bolt, im forgot the metric size, sorry. I needed an impact to remove mine. You dont need an air impact gun, you can use an electric gun, although air is preferable.
verno-dub is offline   Reply With Quote
Old Jun 8th, 2004, 12:44 AM   #3 (permalink)
SentraFourplay
Nissan Enthusiast
 
SentraFourplay's Avatar
 
Join Date: May 2004
Location: Hohenfels, Germany
Posts: 86
32mm

been there done that, any problems just ask, very easy took me 40 minutes start to finish.
SentraFourplay is offline   Reply With Quote
Old Jun 8th, 2004, 08:23 AM   #4 (permalink)
jharris1
Nissan Enthusiast
 
Join Date: Mar 2004
Location: Baltimore (only for school, really from NJ)
Posts: 158
Quote:
Originally Posted by verno-dub
Soon as you pull of the crank pulley you will see the front main seal. The seal is pressed into the timing cover. You just need basic tools to pull all the splash guards off. As for the crank pulley bolt, im forgot the metric size, sorry. I needed an impact to remove mine. You dont need an air impact gun, you can use an electric gun, although air is preferable.

Okay so I guess that means pulling off the passenger wheel? Sounds straightforward enough.
__________________
93 Sentra E, came with nothing but power steering...

KYB AGX struts, Hyperco Gen 2 springs, Ebay FSTB, lots of 89 gas and TLC :)
jharris1 is offline   Reply With Quote
Old Jun 8th, 2004, 08:37 AM   #5 (permalink)
jharris1
Nissan Enthusiast
 
Join Date: Mar 2004
Location: Baltimore (only for school, really from NJ)
Posts: 158
Also, will I have to drain the oil before I start?
__________________
93 Sentra E, came with nothing but power steering...

KYB AGX struts, Hyperco Gen 2 springs, Ebay FSTB, lots of 89 gas and TLC :)
jharris1 is offline   Reply With Quote
Old Jun 8th, 2004, 03:03 PM   #6 (permalink)
SentraFourplay
Nissan Enthusiast
 
SentraFourplay's Avatar
 
Join Date: May 2004
Location: Hohenfels, Germany
Posts: 86
I did an oil change at the same time, but I would recommend it
SentraFourplay is offline   Reply With Quote
Reply

  NissanForums.com :: Nissan Forum > Nissan Models > Sentra, Pulsar, NX, B14 200SX > GA16DE 1.6L Engine



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -5. The time now is 07:41 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0
© 2006 NissanForums.Com