Temp Sending Unit Location

NewbieNX · Apr 9th, 2004, 09:20 PM

I need to know the temperature sending unit location on my 90 Pulsar. I have already replaced the coolant senser. So any help would be appreciated.

Chuck

new94 · Apr 10th, 2004, 11:42 AM

if it's the GA16DE then it's just under your distributor hidden a little, it's a small brass nipple type thing that threads into the engine. It has a single wire going to it, if you have the new one ready then you can quickly switch them without losing alot of coolant only a small stream will come out but make sure the car is cold! My guage quit working so i replaced the temp sensor and it's fine now, good luck.

NewbieNX · Apr 10th, 2004, 02:31 PM

Quote:

Originally Posted by new94

if it's the GA16DE then it's just under your distributor hidden a little, it's a small brass nipple type thing that threads into the engine. It has a single wire going to it, if you have the new one ready then you can quickly switch them without losing alot of coolant only a small stream will come out but make sure the car is cold! My guage quit working so i replaced the temp sensor and it's fine now, good luck.

I dont know if theres a difference I have GA16 not sure on the DE I think its the I. but I am sure going to check. Thanks

Chuck