ynot21

I got a Weapon R Dragon Intake given to me as a gift. When I was putting it on I realized that there was four plastic pipes coming out of the intake tube but I only saw three on the stock intake. Sorry I can't post pics but maybe I'll do it over the weekend. Can someone tell me where the last piece of tubing goes or if there is something wrong. Thanks for the help. As you can tell I am new at this.

aminidab

The 3 vacuum lines coming from the intake go to EGR(small line 3/16"), valve cover(large), and throttle body(large). Don't know why there would be 4 on the intake tube.

__________________
96 Sentra GXE
Boost is addictive
265WHP/257WTQ

samo

I had the same intake on my Sentra. 4 nipples coming off of it, but you only need three. I don't know why there's four, but whatever.

What I did is this: I went and got a long enough bolt to fit from the end of the unused nipple all the way down into the intake itself. I put a small piece of silicone hose on the bolt and crammed it in the intake. Then I just threaded a nylon locking nut on the other end.

__________________
The oldest of the old-school!

ynot21

Thanks I'll try that!!

Bryan200sx

well i have the same intake and what i did was almost the same i got a plastic "T" and i got the 4th line and the 3rd line connected i dont know if you want to do that instead both ways will work just as good. ( i dont have an sr20 but do you think the intake would be interchangeable w/ the sr20 hence the 4th nipple? ) i know the way it fits in the engine is the same and that the intake pipe is bigger for the sr20 other then the 2.5 of the GA16

__________________
Nitrous is like a hot girl with STD's you wana hit it but are afraid of the consequences.
http://www.cardomain.com/member_pages/view_page.pl?page_id=626608&cat=25&val=1