60mm too much??

Teknokid · Jul 7th, 2002, 05:02 PM

OKay well i wanted to get the greddy exhaust system but i hear things that it is too big. 60 mm is about 2.5 inches, give or take. They were saying go stromung 50mm. Will i lose a lot of power?? what kind, low, mid, high?? thanks.

sentra94xe · Jul 7th, 2002, 05:48 PM

2.5" is too big for an N/A GA16DE. I'd stick with something closer to 2", which is just over 50mm. I've heard nothing but positive results and remarks from the Stromung, though I have no personal experience with it. I have a $tillen rear section (muffler) and recently added a B13 SE-R b-pipe... which is around 1 7/8" in diameter. I noticed a significant difference in low and mid torque, especially with throttle response. This is on an automatic GA16DE.

Teknokid · Jul 10th, 2002, 02:33 PM

actually its 2.3". Im probably going with stromung and help support the sentra aftermarket.

WaLdo98 · Jul 10th, 2002, 03:07 PM

Yeah, I would say 60mm is a bit large for the GA16DE motor. I have the HKS cat-back on my car and I do feel some lost in low end power. The HKS piping is 55mm in the front and 60mm towards the muffler. The muffler looks very stock looking and the sound is just great, no droning at all. If I had a SR20DE powered B13, I would get the HKS just because the look of the Greddy is too ricey for me.

Teknokid · Jul 10th, 2002, 03:15 PM

Does HKS make exhaust systems for the B14 GA??

Katana200sx · Jul 10th, 2002, 05:54 PM

no they do not make one for the ga specifically, but the sr20 exhaust they make bolts up perfect. just the piping is a bit too large.

LIUSPEED · Jul 10th, 2002, 06:02 PM

do they make it for the DET's ? cuz i planning to do a S14 DET Swap later on.

azkicker0027 · Jul 10th, 2002, 08:24 PM

just get a 2-inch cat-back, it sounds great, and no whiny puttering sound.....like on most hondas i see...........

samo · Jul 10th, 2002, 08:41 PM

Quote:

Originally posted by LIUSPEED
...cuz i planning to do a S14 DET Swap later on.

Good luck getting a RWD motor to work. You want the Bluebird or Pulsar GTi-R motor, not a Silvia motor.

LIUSPEED · Jul 11th, 2002, 01:41 AM

hey samo...

yea.. i dont really understand the big difference. i want the FWD ones so i dont have to deal with the hassle . the bluebird and GTi-R is what u recommend then i will get one of those.

i have a 2.25 piping.. will that effect the Sr20DET motor at all? 2 big or 2 small?