AznVirus

Anyone know what the stock manual fans for the b14 pulls in cfm?

__________________
1.6 - The Underdog

GA16DE-T Owners Club!
153 HP & 152 TQ

Sanjuro

sorry to revive an old topic, but does anyone know or like to make an educated guess?

IanH

Not enough because people in AZ were upgrading because the A/c condenser was overheating. you can search for the threads.
But I will go and see if I can find my Air velocity meter and make an educated guess.

__________________
1997 Sentra GXE .... SOLD
1997 S-ER 5 sp yea !!!
2003 Pathfinder SE 4WD
Ex- 2001 Sunny N16 RHD (N16 Nissan Bluebird Sylphy)

IanH

Ok this is what I did and found out.
1) my airflow meter only goes to 800 fpm. It is also old and not expected to be accuarate.
2) the air flow is from 2.5 to 6.5 inches from the center of the fan approx
I got over 800 fpm for all this distance. It went to 800 fpm easily so it is quite a bit higher than 800.

Assuming 1000 fpm and 13 inch diameter where measured not fan size, with 5 inch diameter dead spot ignoring the bracing and any obstructions I get an answer of 800 CFM.

__________________
1997 Sentra GXE .... SOLD
1997 S-ER 5 sp yea !!!
2003 Pathfinder SE 4WD
Ex- 2001 Sunny N16 RHD (N16 Nissan Bluebird Sylphy)

Sanjuro

thank you!