injectors

James · Apr 29th, 2002, 03:49 PM

ok, maybe this way more ppl can see this...

i've searched through the mailing list... no luck.

so how many lbs of boost can the stock injectors handle?

thanks.

**morepower2** · Apr 29th, 2002, 04:25 PM

Since the GA injectors are only 190cc/min, they are too small for much more than 4-5 psi.

Mike

James · Apr 29th, 2002, 10:45 PM

thank you. been looking for that for a while.

**morepower2** · Apr 29th, 2002, 10:49 PM

With a boost dependant regulator, it might be possible to squeeze a little more out of them, but the stock fuel pump is pretty weak as well.

JWT is working on a big injector ECU program for the GA as we speak.

Mike

James · Apr 29th, 2002, 10:51 PM

i can get a hold of a rising rate fuel pressure regulator when i put in the turbo, how much does that help? well probably not much...

CarbonBlack200 · Apr 29th, 2002, 10:55 PM

how about swapping SR20DE injectors in? With turbo, maybe JDM SR20VE or DET injectors work better?

James · Apr 29th, 2002, 10:56 PM

ya that work. ecu needs reprogramming tho.

CarbonBlack200 · Apr 29th, 2002, 11:06 PM

GA16DE injector 190cc
SR20DE ???
SR20VE 333cc
SR20DET 360cc

am I right?

Also, I heard 240SX has larger fuel pump and works good with those bigger injectors.

James · Apr 29th, 2002, 11:09 PM

yeah. don't know about the injector sizes but i would think that a 2.4l would obviously need a bigger pump.

myoung · Apr 30th, 2002, 08:35 AM

We are using 370cc injectors in the Project 200SX Build up.

Michael Young

James · Apr 30th, 2002, 09:34 AM

the HS turbo kit does not include those right?

myoung · May 1st, 2002, 02:49 PM

The HS kit will more than likely be a minimum of the manifold and piping.....with the high end being everything needed...

We will have this info as soon as the testing is completed and Hotshot decides exactly how they wan't to market it.. I would say we will have the whole run down within the next 2 weeks.

James · May 1st, 2002, 02:51 PM

how is their Se-R kit sold? can you pick and choose parts or do you have to buy a certain kit... I only ask because this is more than likely how they will sell our kit right?

myoung · May 1st, 2002, 02:59 PM

Well it all depends on the interest... I'm sure they will be willing to work with you on just about any combination you would like.

sno · Mar 24th, 2004, 11:37 PM

this is the 10th thread on here.