Well I am going to remotely mount my BOV. Has this been done (I'm sure it has) and what kind of tubing do I need to use to go from the BOV to the Intake post turbo pipe. Same for BOV to intake pre turbo pipe.
Here are some pics of generally where I have to mount it.
__________________
1987 300ZX Turbo, 5 Speed, TurboXS H-34 BOV, WAI, Under Construction
Clutch, Wheels, Tint, Paint, Interior, HID
Having Fun in Texas! 2000 Nissan Maxima GLE with custom body work & a few other things. CarDomain SiteDallas Nissan EnthusiastsVQPower MOM May 2003
If you are in the need of a 18+ years experienced Real Estate Consultant in the DFW Metroplex please feel free to contact me.
This has been done, in fact HS does soemthing similar on their new 1.6 turbo setup. You can use the pvc reinforced hose from the hardware store as it is more resistant to being crushed.
Thanks very much. I have to go get a pipe barb from somewhere around here. I can't find a 1" pipe barb anywhere that is metal. All the ones that are big are plastic and any smaller won't help neither
__________________
1987 300ZX Turbo, 5 Speed, TurboXS H-34 BOV, WAI, Under Construction
Clutch, Wheels, Tint, Paint, Interior, HID
Just to tell you guys I have this thing installed. I am making a full write up in the Z31 section of the forums. Keep looking there. The write up should be done Saturday or Sunday.
__________________
1987 300ZX Turbo, 5 Speed, TurboXS H-34 BOV, WAI, Under Construction
Clutch, Wheels, Tint, Paint, Interior, HID
Linear Mode
