Turbo Timer Installation

AznVirus · Oct 3rd, 2003, 04:37 AM

Just installed my Greddy full auto timer but it doesnt keep the car on. Everything else works like the RPM speed signal countdown. When I take the key out of the ignition, it counts down fine, but only keeps the radio and accessories on in the car.

It sounds like I tapped the wrong wire, but I keep checking it and everything seems fine. Here are the wire colors that I tapped into.

From Turbo Timer -------> Ignition Wires
Red (to constant 12V) -------> Green
Blue (to ACC) -------> White w/ Blue
Green (to ON) -------> Black w/ Pink

BTW, this installation is on a 97 B14 GA16DE.
Can someone check their FSM and see where I went wrong?
It does say that if the vehicle has 2 ignition (ON) wires (which Im wondering if I missed it), your supposed to connect it differently. I checked the wiring diagrams for the ignition switch and supposedly it has one, so Im stumped at where I messed up.
Thanks.

OZMAN · Oct 15th, 2003, 05:42 PM

did you purchase the turbo timer harness needed for your car,try SR20DEVELOPMENT.COM I got my timer and harness for around 100 buks took only a half hour to install.works fine

AznVirus · Oct 16th, 2003, 04:53 PM

i figured out the correct wire colors, but wierd thing is the FSM lied to me! i checked it like a million times but i guess the wire colors are different. i found a site for an SE-R turbo installation and they use the same harness as us for the ignition so i just used his wiring method. works great.

nismo_200sx · Oct 22nd, 2008, 06:29 PM

does anyone know were i can find the wiring diagram for this turbo timer

**wes** · Oct 24th, 2008, 10:47 PM

Quote:

Originally Posted by nismo_200sx

does anyone know were i can find the wiring diagram for this turbo timer

The first post tells you which wires go from the Greddy timer to the OEM harness, what else do you need?

2dr_Sentra · Oct 25th, 2008, 10:58 AM

HOW TO: Wire up a turbo timer