» Search Used Cars
Search for used vehicles by ZIP, please enter Zipcode below:
Google Links

» Wheel & Tire Center

» Log in
User Name:

Password:

Not a member yet?
Register Now!
Sponsors

Sponsors


Go Back   NissanForums.com :: Nissan Forum > Technical > Forced Induction & Nitrous Oxide
Register Home Forum Gallery Active Topics Search Today's Posts Mark Forums Read

Forced Induction & Nitrous Oxide Turbocharger, supercharger, and nitrous oxide information

       
Reply
 
LinkBack Thread Tools Display Modes
Old Jun 13th, 2002, 12:09 AM   #1 (permalink)
SuckiT
Nissan Enthusiast
 
Join Date: Jun 2002
Posts: 80
Send a message via AIM to SuckiT
Det cant rev past 5k

Well my problem is as stated, I cant rev past 5k at all even in nuetral. When I do, the motor lets off a huge backfire that sounds like a gunshot w/ a huge black puff of smoke to follow. The vac is at 15hg, timing is at 15 and tps is set at .45 exactly. My egt's at idle are 540c, 2k-620c, 3k-700c and 4k-800c. Anything past 4k it starts studdering and by 5k it pops. The "pop" is so powerful that it looked as if it knocked the rpms back down to 2k. It sounds like timing is being pulled and the explosion is happening in the exhaust manifold. My setup is a Gti-r in a classic with the JWT ecu with 9.1 wiseco pistons, swain coated w/ a t28 for now. Any help would be appreciated as I can only think of the knock sensor, bkr6e's plugs and .32 gapping or possibly fuel pressure as the only options.
SuckiT is offline   Reply With Quote
Old Jun 13th, 2002, 09:40 AM   #2 (permalink)
James
in^3,N20,RPM,PSI
 
James's Avatar
 
Join Date: Apr 2002
Location: Irvine, CA
Posts: 4,652
I would guess a fuel related problem. Sounds like your not getting enough fuel above that rpm... Just a guess.
James is offline   Reply With Quote
Old Jun 13th, 2002, 10:53 AM   #3 (permalink)
morepower2
Icy Hot Stunta
 
morepower2's Avatar
 
Join Date: Apr 2002
Location: Cypress, Ca
Posts: 2,359
Re: Det cant rev past 5k

Quote:
Originally posted by SuckiT
Well my problem is as stated, I cant rev past 5k at all even in nuetral. When I do, the motor lets off a huge backfire that sounds like a gunshot w/ a huge black puff of smoke to follow. The vac is at 15hg, timing is at 15 and tps is set at .45 exactly. My egt's at idle are 540c, 2k-620c, 3k-700c and 4k-800c. Anything past 4k it starts studdering and by 5k it pops. The "pop" is so powerful that it looked as if it knocked the rpms back down to 2k. It sounds like timing is being pulled and the explosion is happening in the exhaust manifold. My setup is a Gti-r in a classic with the JWT ecu with 9.1 wiseco pistons, swain coated w/ a t28 for now. Any help would be appreciated as I can only think of the knock sensor, bkr6e's plugs and .32 gapping or possibly fuel pressure as the only options.
Maybe improperly routed AAC/Regulator lines and perhaps a huge metered air leak from piping? AAC/Air regulator must be routed where they see boost pressure.

Also make sure the MAF is not backwards! I have seen that a few time belive it or not.

Make sure the pressure reg is hooked up right as well and you are pressuring the fuel rail, not the fuel line, seen that once also and acted exactly like that.

Mike
morepower2 is offline   Reply With Quote
Old Jun 14th, 2002, 03:21 PM   #4 (permalink)
SuckiT
Nissan Enthusiast
 
Join Date: Jun 2002
Posts: 80
Send a message via AIM to SuckiT
Well everything was checked again. I also checked my codes and 33 and 34 popped up. I checked again 5 min later and it gave me 55, so everything was perfect somehow. I drove off and still the same thing but 30min later i was able to hit 8k, no problem. Im still able to get that back fire if i slowly rev up but i guess its no big deal for now.

I was also wondering tho, my vac used to be -19hg but now its -15hg. How does that happen if there are no vac. leaks? Also is it safe to drive at 800c for long periods of time considering I drive at 4k a lot? Thanks for the replies guys.
SuckiT is offline   Reply With Quote
Old Jun 14th, 2002, 04:20 PM   #5 (permalink)
morepower2
Icy Hot Stunta
 
morepower2's Avatar
 
Join Date: Apr 2002
Location: Cypress, Ca
Posts: 2,359
Also I forgot, close your plug gaps down to 0.020"

Mike
morepower2 is offline   Reply With Quote
Reply

  NissanForums.com :: Nissan Forum > Technical > Forced Induction & Nitrous Oxide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
B13SE Suspension AFTER DET swap enuf? eugenefl Suspension & Brakes 4 Mar 25th, 2004 03:51 AM
RWD CAS (crank angle sensor) on a FWD/AWD DET javierb14 SR-Series Engines (DE/VE) 2 Sep 7th, 2003 04:41 AM
need help!! it wont rev past 3500 87blumr2 GA16DE 1.6L Engine 32 Jul 24th, 2003 09:26 PM
det oil pan Rottdog SR-Series Engines (DE/VE) 2 Jun 25th, 2003 09:50 AM
EASY DET swap......possible? BIGBULS Forced Induction & Nitrous Oxide 10 Dec 21st, 2002 02:02 AM

Powered by vBadvanced CMPS v3.0.1

All times are GMT -5. The time now is 02:19 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0
© 2006 NissanForums.Com