142BHP

Hi

I installed a t3/t04e hybrid turbo on my Nissan Sabre ( SR20DE) and dropped the compression to 8.5 to 1 , I had the car out for the first time last night and the car wouldn't idle at all ( MAF before turbo and vacuum line for idle valve connected to the same line) at .6 bar boost ( 9psi) she ran like a bat out of hell but would stumble at low rpm and clear up at around 4000 rpm just as the boost starts, now this afternoon i had her out again and she died on me at a traffic light and the engine light came on. After much cranking i got her started again but the engine light is still on and the motor cuts at 2500 rpm's , my Haynes manual shows how to extract error codes but my ECM does not have the mode switch on the side.

How the hell do i know what the error code is for and how do clear the code from the ecm. I am installing a management system today but would first like to know what the code was triggered for.

Thanks

Rudie