if the right person reads this, he can tell you there is a Mild racing cam available, i have the same motor in my car, let me know when you find it. ThanX
__________________
Scars Heal, Glory Fades
All we're left with are the memorys we made.
__________________
__________________
I had a '93 Sentra Classic (B12)
Mom's got an '03 Altima 2.5S
Dad had a '98 Sentra GXE
Current "rides": 2000 Kona Caldera "Callie", 1996 Specialized Hard Rock "Betty"
Or you could send your stock cam out to Isky Cams, and have them regrind it for you. Just tell them what rpm range you will operate at, what kind of carb[s], compression ratio, and gearing. That's what I did, and it cost me about $100. I liked the cam so much, I had a second one done, but only used it briefly, because someone ran a red light, and totaled my '84 B11 hatchback. I saved the cam and 15M head. The Isky ground cam is for sale for $50, if anyone is interested. The grind # is Z-330. It is ground on 116 deg. lobe centers, lift is .414", duration is 270 deg. with 38 deg. of overlap. The cam spec. card comes with it of course. It had a slightly lopey idle. I liked it!
Thanks to all for the info on cams - think I'll try the regrind since the other ideas are just too mild - course I totaled the car right after i posted - but i'd gone from 16th place to 4th in 7 laps and thats running againnst guys with 2.2 L motors - so I'm impressed with this little car
__________________
__________________
I had a '93 Sentra Classic (B12)
Mom's got an '03 Altima 2.5S
Dad had a '98 Sentra GXE
Current "rides": 2000 Kona Caldera "Callie", 1996 Specialized Hard Rock "Betty"
Originally posted by Afox1231 Hey Blown, do you still have the cam for sale?
***** Yes sir, Afox1231. Sorry for the delay, I 've been away. browndwtd, sorry to hear your car got clobbered. That dirt racing will do it everytime! Will you get another one?
Originally posted by Afox1231 Will it fit the 33m(i thinks that is the casting #) head off of a 1988 sentra e16i? How much did it help power wise?
***** All E-series cams will go into any E-series head. I have not dynoed my car, but I can tell you, that in my '86 B11 race car, I have run 14.5 @ 93 mph in the 1/4 mile with the aforementioned reground Isky cam. The amount of power gained would all depend on your particular application. If you still used the stock 1 1/2" exhaust system, I wouldn't expect too much of a gain. But if your car had some basic performance upgrades, the cam would give you quite a nice power gain.
Then what are the different casting #'s for. If you are sure that it will fit then i will buy it from you. I plan to find the pacesetter header and a 2 1/4'' Pipe. What elese could i do? Do you have anyother tips or parts. I cant seem to find the header, NOPI says that they have it but I try to confirm that they have it in stock and I never get a E-Mail reply. Which will give me more noticable power buy its self, the header or cam? I still have to pay off my lowering springs first. So money is tight.
Originally posted by Afox1231 Then what are the different casting #'s for. If you are sure that it will fit then i will buy it from you. I plan to find the pacesetter header and a 2 1/4'' Pipe. What elese could i do? Do you have anyother tips or parts. I cant seem to find the header, NOPI says that they have it but I try to confirm that they have it in stock and I never get a E-Mail reply. Which will give me more noticable power buy its self, the header or cam? I still have to pay off my lowering springs first. So money is tight.
*****The casting #'s represent the type of E-series cyl. head. Read the thread "E-series cyl. heads." When you ask what else can be done to an E16, I have to sigh, because I paistakenly typed up pages of high perf. info. on this engine. But, it was on the B15sentra.net website, which recently deleted all of the B11, B12, B13, & B14 Sentra forums. Bummer! A ton of info. gone! I am not going to try to type all that up again. It took me several weeks worth of nights. The cam and the header work best together. Do them as you can afford them. The last time I ordered a Pacesetter header, I had to wait about 3 months, while they made a new batch. Seems like they make them in batches as needed. Check out the other thread I started for another header possibilty. PM me, if you want the cam. Blownb310
A ton of info. gone! I am not going to try to type all that up again. It took me several weeks worth of nights. The cam and the header work best together. Do them as you can afford them. The last time I ordered a Pacesetter header, I had to wait about 3 months, while they made a new batch. Seems like they make them in batches as needed. Check out the other thread I started for another header possibilty. PM me, if you want the cam. Blownb310
Linear Mode
