I have a E16S and I can't make it up the canyon. I live in Utah and I love the mountains, but this car will not make it. Any tips on cheap intake mods or exhaust mods. My only mods are suspension. I have a titanium muffler but haven't welded it on yet.
is this the carb model? I had the same problem in Colorado with a 289 Mustang. Car can't breath at a high altitude. I took a Coors beer can and ripped in half. Jammed it into the carb intake so as not to let the choke take over and it worked fine.
you'd better get headers, and install that exhaust... you might as well go fullpipe!
i had the same problem with my car up in the mountains... it really is bad breathing... surprisingly, just a muffler change and the cheapest aftermarket air filter you can find should help solve the problem.
__________________ Bigbigcar.com
My new hobby... driving.
Ford Lynx RS / Mazda Protege MP3: Slow but Furious out of the box. :D
No. If it's bogging under load or requires premium fuel, something is wrong. Headers/exhaust will not fix or improve on that.
You need to work through all the vacuum lines and verify their condition and proper routing. Check for vacuum leaks. Confirm timing. Once that's done, test the computer for codes and proceed with testing based on what you get. Once the car is running properly, if you're still not satisfied with the performance you can reasonably consider performance modifications. Doing that on a broken engine like you have now is a waste of time and money.
__________________
84 Ford Bronco II 2.8
86 Ford Bronco II 2.9
86 Nissan Pulsar w/ Weber and CA distributor (gone, but not forgotten)
I just had a complete carb rebuild 700.00 bucks then PCV, oil change, air filter, O2 sensor, starter, battery, plugs, wires, I think my plugs might be fouled out though so I am going to check and see. How much is a header?