B12Power

I just tried to change the belts on my 1993 Sentra Classic - E16i with power steering.

I couldn't get the power steering pulley to move even after I loosened everything up like it says in the Haynes manual. Tried tapping it with a mallet and dousing it with WD40.

LittlebittaContact

did you loosen the bolt that goes thru the pump bracket AND the looooong bolt that puts tension on the belt??

__________________

Scars Heal, Glory Fades
All we're left with are the memorys we made.

RiceBox

Yeah there are TWO bolts. The one you can see and the one that runs perpendicular to the one you can see. The second one is a bitch to reach but you will have to loosen that one to get the pump to move.

__________________
__________________
I had a '93 Sentra Classic (B12)
Mom's got an '03 Altima 2.5S
Dad had a '98 Sentra GXE
Current "rides": 2000 Kona Caldera "Callie", 1996 Specialized Hard Rock "Betty"

B12Power

Yeah... I loosened both bolts, but the thing will not budge. I'll try applying more force.

I loosened the long tensioning bolt and the lock nut attached to the pump bracket.

B12Power

Just finished both belts. All I needed was some help from a pry bar and a mallet. Runs smooth and no more squeeks.

Thanks for all your help!