Pulley, "one-ball," K&N intake (hai setup straight to throttle body) = 187 hp and 158 tq.
Pulley, "one-ball" K&N intake(hai), and NOS over intercooler .....
.....
....
....
That's right. 235.5 hp and 195.8 tq.
Go nitrous!!
Keep in mind, NONE of the NOS went into the Intake tract, so in essence all you are doing is super cooling the charge of air after it has been compressed, further compressing it.
NX will sell you a kit for 396$ with a 10 lb bottle and everything you need. NOS cost anywhere from 3.50$- 5$ a gallon. And as long as it is perportioned correctly with the fuel, will not harm the engine in anyway. After all, all it is is super cold oxygen.
Really, all you need is 1 solenoid, tubing and something to bend it (like pvc pipe), connectors, and steel braided line. (of course a bottle as well)
How do you gauge usage? Based on your jet (pill) size. A 100 shot for example uses .8 lbs of NOS per 10 seconds. So, in 12 seconds you expend about 1 lb of NOS ( a typical bottle is 10 lbs).
So this would be an excellent setup for short quick bursts, however for the race track, a BIG FMIC of W\A IC would be preferred.
But for quick\cheap fun on the street, I'm gonna go with some NOS.
Back to me
holy crap, this really makes me want to spray my ic
__________________
It's not a matter of deserving. It's a matter of strength. the power to hold versus the power to take.- Sygg, River Cutthroat
Heh, spray is $2-$4+ a pound, not gallon. And it would be much more beneficial IN the motor!! Small shot would get more gains and drop the intake temp. Say a 35 shot. Or can your motor not take the giggle gas!?!?!
By freezing the intercooler you'd have a longer more reliable cooling effect than the burst of n2o into the engine.
__________________
90 CR-X 11:1cr,itb,100hp/liter 1.5l
05 gsx-r 600 8.5sec@125mph,SOLD
97 Maxima 5sp black on black-SOLD
94 Q45 Green on Tan- SOLD
90 silvia/240sx 5spd widebody-FOR SALE? www.myspace.com/adrenw
If the nitrous is setup and tuned properly it won't wear on the engine. A small 35 wet shot would much more efficient cooling and much cheaper. Bottle would last a long time instead of pissing it into the air.
If the nitrous is setup and tuned properly it won't wear on the engine. A small 35 wet shot would much more efficient cooling and much cheaper. Bottle would last a long time instead of pissing it into the air.
Yup,I totally agree with you on that one.
__________________
90 CR-X 11:1cr,itb,100hp/liter 1.5l
05 gsx-r 600 8.5sec@125mph,SOLD
97 Maxima 5sp black on black-SOLD
94 Q45 Green on Tan- SOLD
90 silvia/240sx 5spd widebody-FOR SALE? www.myspace.com/adrenw
or another cheaper way would be a water injection system cuz water is free and it cools the charge just the same with out any harmful effects boost cooler
He can't do anything without bigger injectors. Were at 85 percent duty cycle now. Anything past that is askin for trouble (hell we hit 94 percent at ennis). Doing anything to make more power isn't smart. Oh and the car is outta MAF to it hit 4.92 volts and the max is 5. This is only on 7-8 psi.
__________________
94 se-r saphire blue with lot's of crap
I'm just a monkey. I don't know shit.
In the white SE-R when the AMG benz did the ricer fly by on 408 :)
I understand he's at the limit of his injectors (not sure about Nissan but LS1 injectors will run 105% duty cycle all day long.) A wet shot jets fuel with nitrous through the nitrous nozzle, has nothing to do with injectors. My injectors run 80% duty cycle on motor and 75% on bottle (jetted a little safe on the fuel side.) Now the MAF concerns make sense since he's walkin the line of measurable flow. On the bottle it would be moving air a little faster and would likely push that limit.
Linear Mode
