B13 M3 Mirrors

danifilth · Jun 12th, 2003, 08:31 PM

Hey guys i was just installing my M# mirrors on my NX1600 and was wondering about the wiring.I got these mirrors on ebay and the wires are a different color then my orig wiring.The power mirrors have some weird striped wires while the M3s have a black white and blue.If someone could please help me out and tell me what the different colored OEM wires are then I could finish the installation.Also if it is no trouble I was also wondering the best way to wire these to my Blinkers and Drive lights but don't know where to wire them.Thanks Guys You Have always been there to help me out.

sno · Jun 13th, 2003, 12:33 PM

only advice i can give is to do a search. i'm pretty sure this topic has been covered before. also, check the haynes manual for wiring diagrams.

clayk16 · Jun 13th, 2003, 01:38 PM

black is ground, white and blue are the two powers for the lights. one is dim the other is bright

danifilth · Jun 13th, 2003, 10:35 PM

thnaks for the help but I got them done this morning it took about 3 hours to find good spots and i had to dig for old wires to extend the ones that came in the package.they look good but they are off of Ebay and have a weird fit so Im gonna find some paintable black caulk or something to fill in a couple cracks around the plate that attaches it to the door. thanks again