i checked the specifications on a 93 SE-R and a new SPec v. A stock 93 SE-R does 15.8 in a 1/4 mile and a stock spec V does 15.6. Is this True ?how come the times are so close when there is 35hp in between??
those times are wrong, well the se-r is pretty right, but the spec actually does the 1/4 in about 15.3 with an average driver, and a 15.0 with a really good driver.
Originally posted by sr20dem0n those times are wrong, well the se-r is pretty right, but the spec actually does the 1/4 in about 15.3 with an average driver, and a 15.0 with a really good driver.
I don't think your numbers are correct either, as a general statement that is. I doubt a stock Spec-V will run a 15 flat. I know some "average drivers" here in AZ with Spec's running high 15's and some low 16's, even with an intake.
One guy here that ritually races at Firebird Raceway runs a 15.1-15.3 consistantly. And he has I/H/E, JIC Coil-Overs and motor mounts. His times have alot to do with the tracks crappy condition though. But even in optimum conditions I don't think he'd break a 14.8.
Last edited by KSipmann : May 6th, 2003 at 09:45 PM.
I know one person personally who has hit a 15.0 stock in a spec-v (stock rims/tires, full interior, and spare) and another who has hit a 14.8 with only an intake and BS removal. It's all about conditions.
I also know of a Spec that ran a 14.6 with the bolt-ons but I think 15 flat is capable on a stock Spec but it would have to be driven very well. I would say on average that is not the case though.
I would say from what I have seen on average 15.3-15.5 or so is the average for the Spec stock.
__________________ Derby City Imports
-'02 Nissan Sentra SE-R Spec V
*Sponsored by Corbeau, Eagle One, HPAutoworks, Stop-Tech, Syndicate Kustomz, and Valvoline
- '92 Nissan Stanza XE | '04 Saturn Vue Redline | '02 Yamaha YZF-R6 -
Originally posted by sr20dem0n I know one person personally who has hit a 15.0 stock in a spec-v (stock rims/tires, full interior, and spare) and another who has hit a 14.8 with only an intake and BS removal. It's all about conditions.