Slimbob

03 SER Spec V

Well, 233K on the odometer and time to replace the rear wheel bearings (Hubs I think in this case). I purchased the new hubs but there are no Lugs in them and the holes are not knurled to receive lugs.

Any hints, things I should know about replacing these bearings? Special tools needed?

Thanks in advance,
Slimbob

__________________
Slimbob
03 Spec V

smj999smj

They don't sell the hubs in this case with the wheel studs nor the sensor ring for the ABS, as applies. Both have to be pressed into/onto the hub. If you want new wheels studs, they are Nissan #43222-41B00. If you have ABS, you will need the sensor ring, Nissan #47950-4Z001.

Part Detail

Slimbob

Thanks for the input!

I suppose I will need to buy some lug studs and it looks like there is a seal behind it.

Slimbob

__________________
Slimbob
03 Spec V

smj999smj

That's not a seal; that's the ABS sensor ring in the pic.

Slimbob

SMJ999SMJ,
Yes, ABS sensor ring. I thought of that while I was at the Parts store.

You wouldn't happen to know the size of the spindle locknut would you? I have 32mm but that was too big. Maybe a 28mm or smaller.

Thanks,
Slimbob

__________________
Slimbob
03 Spec V

smj999smj

Probably a 30mm.