Slimbob

Any tips on replacing the front wheel bearing?

I'm about to get started. Have the wheel off and ready to break the nut loose. Locking the rotor with screwdriver and caliper mount to break the nut free.

Anyone know the torque setting for the axle nut?

Thanks,
Slim

saint0421

Front wheel bearing lock nut is supposed to be torqued to 188-245ft lb.

__________________
So. . . Your face is dumb!

silverbullet_specV

just buss the axle nut off it should be 1 inch or 1 1/16 inch. your gonna want to remove the whole assembly to make it easier, use a air chisel to remove the old make sure the race comes out as well. hammer in the new one make sure it is packed(with grease) using a 2x4 and a softblow hammer re install the assembly torque the axle nut and lug nuts then go get an alignment just to make sure nothing is out of wack