Nismo_Gizmo

So im going to install the alpine unit out of my 300zxTT into my sentra. There is no mounting brackets or anything to bolt in the radio, wtf? Also What about this factory sub and front pillar speakers? How do i hook these up? Im assuming now that the pillar speakers are hooked to the front left and right door speakers as far as wiring to the head unit, but no clue about the rear sub.. Whats the best way to do this, im clueless here.. Thanks!

yellowspec-v

There are mounting brackets for the radio. You have to take them off of the factory radio and use them for the Alpine. as for the wiring just go to a stereo shop and they'll hook you up with all of the correct wiring harnesses and the dash kit that you will need. The sub and front speakers are both hooked up to an amplifier that is located under the rear deck and the rear speakers are run off of the radio. You can hook it up without doing a bypass but if you're replacing the factory speakers you'll want to do the amp bypass. The A-pillar speakers are just tweeters that are hooked up to an internal crossover that runs in unison with the corresponding door speaker. What i would do is do the bypass but still leave the amp plugged in so you still have use of the factory sub.

chimmike

there's no reason to put this in the sentra section, we have a perfectly good audio area, please use it!

__________________
My Website, check it out!
2003 Redline 350z Enthusiast 6MT Turbonetics Powered