as of right now i have the saw blades on my car (see pic at bottom) well i have been searching for about 2 days now because i know the thread exists! but i cant find it at all! i have pm'd many people and no luck, well i will just ask in my own thread (scream, yell, hollar, i dont care but give me info after you yell at me) how do you need to gride the caliper to fit the 14in. saw blades? i do have se-r wheels but the tires are shot and i dont have enough money to buy tires yet and i need these brakes.
-iirc the problem is that on my wheels where the spokes meet the wheel on the inside is rounded, and the 14in. wheels that came with the nx200 were square, so i need to grind the outer edge of the caliper round correct?and if anyone has a "before and after" pic that would be superb!
__________________
Quote:
Originally Posted by mitch hedberg
escalators can never break...they can only make stairs
yea, this is 1.6pete.....whatchu want foo!
Last edited by nismo1.6 : Feb 10th, 2005 at 11:59 AM.
Won't fit unless you do some grinding. Find some decent 15" or larger rims and they'll fit fine. I know from MY personal experience the 16's work fine (obviously). Get a set of the 15" SE-R rims and they'll work fine.
^^He knows that they wont fit without grinding. Unless you have b14 SE-R wheels they arent going to fit without grinding the caliper also. Unless your brake pads on the AD22's are worn down.
i have se-r wheels but i need tires AND brakes asap.
You keep saying you have SE-R rims...are they B13 or B14 SE-R rims? If they are B13 then all you have to do is grind the calipers down to where they dont touch the rims...whatever touches the rim when you put it on before grinding is what you need to grind down until it doesnt touch anymore. Simple
Yeah, but your sig says you have a GXE so I couldnt automaticaly assume that you had B14 SE-R rims. I also didnt assume that you knew that B13 SE-R rims wouldnt fit. I try to Assume nothing...it makes it easier to help people
Yeah, but your sig says you have a GXE so I couldnt automaticaly assume that you had B14 SE-R rims. I also didnt assume that you knew that B13 SE-R rims wouldnt fit. I try to Assume nothing...it makes it easier to help people
whats wrong with the stock brakes?
and how bad are the tires on the ser rims
__________________
hot chicks aren't going to be like...."hey i think i'm tired of these buffed guys on stage with big dicks and shaved balls...but wow, check out that fat balding nerd with hair coming out of his turtleneck sitting in the corner there...mmmmm"
what is it that is shaved? in the green? or the red?
Doesn't the bare metal part give that away? The entire bare metal area is what was ground down.
And some of the steelies do clear without any problems, however the OEM 14" 200SX/Sentra wheels do not fit over the NX brakes. I had them and tried it personally they rubbed. I am sure that with the same grinding needed to clear the B13 SE-R wheels would work for the 14" wheels.
Linear Mode
