GA16DEKID

I just bought a pressure plate (ACT), is it ok to use the oem disc or is it not going to hold up? I heard that the 2000 sentra disc is a little more heavy duty and if that is going to work any better.

dan7225

i believe you are right. the b15 2.0 clutch disc is thicker than the b14 clutch disc and yet is still compatible with the b14 2.0 5-speed. i think the NPM magazine has an install on this same particular subject.

would probably make a good combination together too.

BORNGEARHEAD

I know this is a pretty old post but I wanted to chime in and mention that the B15 clutch disk has dual springs compared to the single springs found in the 91-99 2.0 disk.

__________________
93 NX2000 w/sr20ve
98 Frontier

Greg200SE-R

Better and longer-lasting friction material too.

__________________
.
Platinum Gold '98 200SX SE-R 17" Nippon Ver.5 AEM in/Tenzo R out Intake cam 17* Tein SS 336lb F+R w/pillowballs Progress rear sway bar Shigspeed LCA brace F/R strut bars H&R Trak+ Prothane/ES polys B&M SS/Nismo GT Ti JWT PP Stillen Type2 wing
________________