|
must've been the 1 1/4". didn't have one, but I came across a 33mm. It took the nut off just fine. I did have to buy a 2 1/2 foot long screw driver, (from Autozone for $2). Stuck it through the passenger side of the tranny, and was able to knock out the driver side c/v axle with to quick taps from my hammer. Overall, took me about 2 hours to complete the job. new shafts are in, and the car rolls just fine. the key is having that long skinny screw driver to get the driver side shaft out!
|
Linear Mode
