» Search Used Cars
Search for used vehicles by ZIP, please enter Zipcode below:
Google Links

» Wheel & Tire Center

» Log in
User Name:

Password:

Not a member yet?
Register Now!
Sponsors

Sponsors


Go Back   NissanForums.com :: Nissan Forum > Nissan Models > Sentra, Pulsar, NX, B14 200SX > B13 91-94 chassis
Register Home Forum Gallery Active Topics Search Today's Posts Mark Forums Read

B13 91-94 chassis 1991-1994 Sentra and 1991-1993 NX

       
Reply
 
LinkBack Thread Tools Display Modes
Old Apr 4th, 2005, 05:33 PM   #1 (permalink)
cz94sentra
NissanForums Newbie
 
Join Date: Apr 2005
Posts: 3
Replacing starter

Hello everyone,

I am new here, but I have had my '94 nissan sentra XE for over five years and it has been very reliable for me. I have a few questions regarding the starter.

First, I believe my starter is going bad. My car wouldn't start and through some searches on this forum I figured it was the starter, and after hitting the starter with something (suggestion in other thread) my car started. Anyway, if the starter is going bad how long will it take before it won't start at all regardless of how hard I hit it?

Secondly, I have not had a lot of experience working on cars, but I have done a few simple things (too busy with college and work). Is replacing the starter something I should be able to do, and how would I go about doing this? (I am fairly good at following directions).

Thanks in advance,
Casey
cz94sentra is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old Apr 4th, 2005, 08:06 PM   #2 (permalink)
mjbw372
NissanForums Newbie
 
Join Date: Jun 2004
Posts: 8
I have the same problem with a 96 200sx

Hello. That is too wierd. My starter was giving out on me this weekend on my 96 200sx, and I took it in to be looked at today, and when the guy hit it, it started, whereas a few seconds before that, it wouldn't even turn over. So, hopefully we'll get some good advice here, for I am in the same boat as you. I definately want to try and replace mine myself if I can. Oh, also, which thread was that that said to hit the starter to get it started? I haven't been able to find it.

Last edited by mjbw372 : Apr 4th, 2005 at 08:31 PM.
mjbw372 is offline   Reply With Quote
Old Apr 4th, 2005, 09:16 PM   #3 (permalink)
Catman
Nissan Fanatic
 
Catman's Avatar
 
Join Date: May 2004
Location: St. Louis
Posts: 450
Not able to help you much on the replacement aspect. If your car is Automatic, you can do it from above according to Alldata. Come to think of it, if you look in the B14 FSM it will probably be about the same procedure. Mine was towed to the Nissan Dealer about 3 1/2 years ago. So I have an OEM one. I have heard some people will get the cheap rebuilt ones, and they will not last. I would be concerned that it may leave you stranded if not replaced soon.
__________________
Truth alone triumphs, not untruth. :)
Catman is offline   Reply With Quote
Old Apr 4th, 2005, 11:40 PM   #4 (permalink)
MsifitOfMusic
Sorta-Newbie
 
Join Date: Jun 2004
Posts: 22
I have an automatic, I just replaced my starter about a week ago. It was pretty easy, only took about a half an hour- hour.
MsifitOfMusic is offline   Reply With Quote
Old Apr 5th, 2005, 04:43 PM   #5 (permalink)
cz94sentra
NissanForums Newbie
 
Join Date: Apr 2005
Posts: 3
I have a manual...

and I have a second car, so I will not be driving this one long distances of course. It is only being used in town when me and my fiancee both need a car.

As far as the rebuild starter, I was planning on buying a brand new one from a parts store (or I could get one directly from a nissan dealer, I guess). I hope this will not die on me too quickly.

I asked the dealer how much it would cost to get it replaced and they said about $325 and I could buy a new starter for only $120. So if it is not too difficult I would like to replace it myself.

Anybody out there that has done it on a manual and can give helpful instructions?

Thanks,
Casey

P.S. As far as the thread, I can't remember which one exactly. I was searching and just happened to click on it. I will continue searching just in case there is already instructions out there. And if I find it I will let you know.
Thanks

*Here is where they suggested hitting the starter
http://www.nissanforums.com/showthre...lacing+starter

Last edited by cz94sentra : Apr 5th, 2005 at 04:53 PM.
cz94sentra is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old Apr 6th, 2005, 07:15 PM   #6 (permalink)
mjbw372
NissanForums Newbie
 
Join Date: Jun 2004
Posts: 8
Re:Replacing the starter

Quote:
Originally Posted by MsifitOfMusic
I have an automatic, I just replaced my starter about a week ago. It was pretty easy, only took about a half an hour- hour.
Hello. Wow, it was that easy? What exactly did you do? I just bought my starter today, and I have a 200sx automatic. I've been trying to find the darn thing. What all do you need to take off the engine to get to it? Thanks in advance for any help you can give!
mjbw372 is offline   Reply With Quote
Old Apr 6th, 2005, 09:13 PM   #7 (permalink)
Catman
Nissan Fanatic
 
Catman's Avatar
 
Join Date: May 2004
Location: St. Louis
Posts: 450
With an automatic, you replace it from top. Here is one description:

http://www.nissanforums.com/showthre...er+replacement

A search may give you other helpful info. Good luck!
__________________
Truth alone triumphs, not untruth. :)
Catman is offline   Reply With Quote
Old Apr 6th, 2005, 10:43 PM   #8 (permalink)
MsifitOfMusic
Sorta-Newbie
 
Join Date: Jun 2004
Posts: 22
I replaced mine from the bottom, i had a lift i used, it was really easy. Just stand under the passenger side of the engine and look up towards the driver side next to the transmission, you should see it right away. Then 2 bolts and remove the posative wire, do the reverse with the new one and ur done.
MsifitOfMusic is offline   Reply With Quote
Old Apr 6th, 2005, 10:56 PM   #9 (permalink)
ciVick_EX
Sorta-Newbie
 
Join Date: Jul 2004
Posts: 18
My starter has also failed me today, and it pissed me off... had some people push the car and get it going, so it was OK for the moment

However, I'll be buying and installing an OEM replacement soon. This unit I bought from a junkyard about a year and a half ago. This is how I feel now:

Here's the thread I found about the starter:

http://www.nissanforums.com/showthre...arter+location
ciVick_EX is offline   Reply With Quote
Old Apr 7th, 2005, 09:07 AM   #10 (permalink)
blackmaxima88
Nissan Enthusiast
 
Join Date: Mar 2005
Location: New Cumberland, PA
Posts: 217
Send a message via AIM to blackmaxima88
get one from a dealer. mine went bad in my 94 XE so I got a lifetime warranty starter from auto zone (which is where I worked). the starter died 3 weeks later. they've also given me numerous alternators for that car that wouldn't last more than three months or so. I've seen some of the remanufactured parts that they sell and it's appalling. they re-use parts like brushes and voltage regulators which SHOULD be replaced with new ones. a good example of you get what you pay for.

Dan
blackmaxima88 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old Apr 7th, 2005, 12:19 PM   #11 (permalink)
ciVick_EX
Sorta-Newbie
 
Join Date: Jul 2004
Posts: 18
Quote:
Originally Posted by blackmaxima88
get one from a dealer. mine went bad in my 94 XE so I got a lifetime warranty starter from auto zone (which is where I worked). the starter died 3 weeks later. they've also given me numerous alternators for that car that wouldn't last more than three months or so. I've seen some of the remanufactured parts that they sell and it's appalling. they re-use parts like brushes and voltage regulators which SHOULD be replaced with new ones. a good example of you get what you pay for.

Dan
Aww man this is not what I want to hear Alternator is from Autozone, starter from junk yard... crap I guess I need to pay for this stuff. What a headache.
ciVick_EX is offline   Reply With Quote
Old Apr 8th, 2005, 02:10 PM   #12 (permalink)
da603headbusta
Sorta-Newbie
 
Join Date: Apr 2005
Posts: 15
Just wondering if the starter is in the same location in the manual that it is in the automatic??
da603headbusta is offline   Reply With Quote
Reply

  NissanForums.com :: Nissan Forum > Nissan Models > Sentra, Pulsar, NX, B14 200SX > B13 91-94 chassis



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Starter installation - SR20 redhat-z B13 91-94 chassis 1 Feb 17th, 2005 10:53 PM
87 Nissan SE-V6 Starter Problems craftsman don New Member Forum 0 Sep 21st, 2004 07:00 PM
Replacing the Starter djanim8 B14 95-99 chassis 9 Jul 16th, 2003 04:02 PM
starter keeps going out sno GA16DE 1.6L Engine 1 Mar 7th, 2003 06:17 PM
Replacing Starter in 97 Sentra tknight101 GA16DE 1.6L Engine 6 Feb 2nd, 2003 07:21 AM

Powered by vBadvanced CMPS v3.0.1

All times are GMT -5. The time now is 02:36 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0
© 2006 NissanForums.Com