TheNatrix

I know this could be under brakes, but not many people post there....

I have a b13 Sentra and am interested in doing the NX2000 brake upgrade. My question is this:

What do I need to get from the junk yard to do a complete swap?
Is this swap front only or both? How much est. cost?

Any answers would be a big help. Thanks-

Hawaii_SE-R

You have an XE. You may have to do all four corners since the NX200 comes as 4-wheel disc brakes. This would entail getting all pieces of the brake system: calipers, rotors, lines, and Brake Master Cylinder.

However, if you like, I believe you can do just the front brakes where the size is different versus the SE-Rs. All you will then need is the rotors and calipers. I would suggest getting them from your local autoparts store where they have been reman since they are cleaner and the seals are new.

If you really want the best answers for your technical questions, especially for parts that are commonly found on SR20DE cars, go to www.SR20Forum.com.

__________________
http://www.serca.org/hawaii/DCs_sig.jpg
1991 Aztec Red SE-R: JWT ECU, S3 Cams, PP, Motor Mounts; Stillen STB, Intake; Hotshot Header, CAI; UR 3 Pulley set; Custom exhaust w/ Sebring muffler; Eibach Prokits Springs & Roadhandler Struts?; Random Thoughts Rear STB; Magnecor wires; AMSOil; AD22VF brakes; Metal Master pads; Ford High-Performance Synthetic brake fluid; SMC SS brake lines; LoTek A-pillar Gauge Pod w/Autometer gauges; Techtom MDM-100; B14 SE-R rims w/ S0-3s; Tsuru headlights w/Silverstars; Hella FF50 Driving Lights; N-Tech Subframe connector; Baker Precision Silicone radiator hoses; NX center counsol

1991 Vail White SE-R: K&N drop-in air filter, oil filter and a lot of AMSOil

Parts on the side: Unopened ES Bushing Master Set; Unopened SMC Short Shifter; Used GC coilover set; New ZEX/Compcams ultra-light flywheel; Used SS Nakayama muffler

Zexel

they are ABS correct? damn I hate locking my shit up!! I was thinking of doing this myself...what is the smallest wheel you can fit around this "upgrade"?

__________________
http://members.cardomain.com/zexel01

Hawaii_SE-R

Yes, as strange as it may sound, the correct calipers for the NX2000 is listed to include ABS even if you don't have it.

You can fit a B13 SE-R rim on there but you would have to shave some material off of the calipers. The NX2000 rims will work of course and the B14 SE-R rims will fit no problem. The smallest rims you would need to run theses brakes would be a 14" with either the correct offset or spacers (not recommended).

RATED-R

I think you can use a altima master cylinder check SE-R.net or something like that. if you are looking " SAMO " help me out, but my boy says it's possible.