Cruise control

wissnx01 · Aug 10th, 2003, 08:14 AM

A few weeks ago, my cruise control worked fine. Now when I set it, it coasts until it drops below about 10mph from my setting, and the green light shuts off. SO the cruise doesnt work. How do I make it work. could it be a fuse?

toolapcfan · Aug 10th, 2003, 12:29 PM

I'm going to say that it's either the actuator or the pump. If you have a vacuum gauge you can check the pump and if that's good then the actuator might be leaking and not holding vacuum.

2SR20DE · Aug 11th, 2003, 01:36 AM

Quote:

Originally posted by toolapcfan
I'm going to say that it's either the actuator or the pump. If you have a vacuum gauge you can check the pump and if that's good then the actuator might be leaking and not holding vacuum.

toolapcfan... My cruise control wan't working either... I'm in the middle of my engine swap and while doing so I noticed the vacuum line was off of the pump... also the line was cracked at the end so I'm thinking this may be my problem. I don't know if the line was knocked off while i was removing the engine though.... I'll let you know wisnnx01 if this was my problem.