XtremE

is there any difference?
what parts do i need when swapping out
calipers
rotors
pads
anythin else?

__________________
01 Sentra SE/PP 5 speed, AEM CAI, ES MM inserts, ADV TMG :D
02 Maxima SE 6 Speed:) Cattman Exhaust, UR Pulley, PRI CAI, ADV TMG
04 Honda CBR 600RR Jardine CF exhaust, Greggs flush mounts, Puig screen, Competition Werks Rear Fender Eliminator Kit, Dr X Kit X-treme tail light

 

sunnysentra

You should go for the NX2000, the SE-R brakes are not that much bigger than XE. THe NX rotors are wider and larger, calipers are larger and piston is bigger for clamping pressure. There are issues with the rear drum. I would replace the drums woth the discs and get an Altima master cylinder to run the NX 2000 front and rear disc. Get metal master all around pads. Thats my suggestion. Also get goodridge lines and motul fluid
Chris 92 classic

__________________
Part of the AUTO / MANUAL SWAP CLUB

Sentra_Industies

I've read that you need to replace the hubs to use the NX2000 brakes. I'd like to do this but dont have the time right now, or cash.

__________________
Uncorruptable Official Juror of the NissanForums Court of Eternal Justice

WRC Fan

What are the issues? I have a clicking sound that has just started in the right rear.

toolapcfan

I think what he meant by issues, that when you swap out the rear drums for the AD7HA rear discs found on SE-R's/NX/Any B13 with ABS, you have to change out the e brake cables so they'll connect to the discs and you have to swap out the rear spindles and trailing arms. Base model Sentras have the CL18VD front discs, the SE-R front discs are the AD18VE's and the NX fronts are the AD22VF's. You'll want to swap out the Master Cylinder like Crhis mentioned. Your car has the 13/16" bore MC and considering the Altima is a upgrade over the 7/8" one found in the NX an SE-R, I'd spring for the Altima MC. I second the SS lines and the RBF fluid. But for pads, I'd get OEM Nissan pads.

__________________
Rob '93 SE-R

PM or e-mail me for Progress swaybars $190 shipped, B13 Progress coilovers $1300 shipped and B13 Progress LCA brace $160 shipped.

 

emeny

I have a sentra XE, and I was wondering if the brakes upgrade is dificult to do, and what do I need to get from the nx2000, so I could go look it up in the junk yard ??? help...

__________________
Sentra B13 GA16

MeNY

XtremE

i didnt do the brake swap
but i got some pro-kits/kyb gr2 installed for 180$ with a se-r spoiler
they only got 4K miles on them

__________________
01 Sentra SE/PP 5 speed, AEM CAI, ES MM inserts, ADV TMG :D
02 Maxima SE 6 Speed:) Cattman Exhaust, UR Pulley, PRI CAI, ADV TMG
04 Honda CBR 600RR Jardine CF exhaust, Greggs flush mounts, Puig screen, Competition Werks Rear Fender Eliminator Kit, Dr X Kit X-treme tail light

johnand

I did the SE-R front upgrade as well as the SE-R rear upgrade. I am still using my stock MC w/ no problems. The SE-R front brakes are only slightly bigger, but if you can get the parts for cheap (OR nothing like I did), it is a worthwile upgade.

__________________
1991 Sentra SE - Auto to Manual swap, 15" Rota Subzero's, 205/50 Kuhmo 712's, Tsuru headlight conversion, SE-R front and rear disc brakes, SE-R front and rear swaybars, SE-R throttle body, SE-R rear inner taillights, HS CAI and Header, H&R springs, Koni shortened struts, ES Hyperflex kit, B&M Short Shifter, Autometer gauges.