» Wheel & Tire Center

» Sponsors
» Sponsors
Go Back   Nissan Forums: Nissan Forum > Nissan Models > Sentra, Pulsar, NX, B14 200SX > B13 91-94 chassis
Register Home Forum Gallery eBay Marketplace Active Topics Search Today's Posts Mark Forums Read

B13 91-94 chassis 1991-1994 Sentra and 1991-1993 NX

Please Visit our Site Sponsors

SolsticeForum.com is the largest Nissan Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old May 5th, 2008, 02:57 PM   #1 (permalink)
NissanForums Newbie
 
Join Date: May 2008
Posts: 3
1994 Sunny, (N14), 1.6 16v rough idling.

I have a Nissan Sunny 1994, 5 door with a 1.6 16 valve engine, 170,000km on the clock. In other parts of the world this may be called a Pulsar or Sentra, it is an N14.

It is not "serviced" as such, but I have had the oil changed, (and the filter of course), at the end of October when it was in to have a part of the pipe replaced, (the pipe that takes the burnt gas from the engine to the back of the car).

It has been very reliable for years, but about a month ago, I rolled up to a red light and the engine, instead of slowing to idle, slowed to a stop. It started first time and was fine. I thought little of it.

Over the next few weeks, it has done this several times, as much as 2-3 times a day. When it is idling, it seems to be doing so un-evenly. I have, on advice from a colleague, changed the airfilter, (easy), and the sparking plugs, (reasonably easy - needed a special narrow plug spanner), the removed plugs looked very clean. This has not made things better, (or worse).

Are there any other easy things I can look at that might help? I have only very basic tools, but will try things if they seem within my capabilities. If I take it to a workshop in Denmark, the charge for walking through the door would make most people faint.
adrianxw is offline   Reply With Quote
Sponsored Links
Advertisement
 

Old May 5th, 2008, 04:28 PM   #2 (permalink)
Nissan Fanatic
 
kizer24's Avatar
 
Join Date: Mar 2008
Location: Waco, TX
Posts: 473
try to clean the IACV
here is a thread with info about it. Rather easy all u need is a 10mm socket and some carb cleaner.
http://www.nissanforums.com/ga16de-1...ng-long-2.html
kizer24 is offline   Reply With Quote
Reply

  Nissan Forums: Nissan Forum > Nissan Models > Sentra, Pulsar, NX, B14 200SX > B13 91-94 chassis


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBadvanced CMPS v3.1.0

All times are GMT -5. The time now is 02:37 AM.


Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.2
© 2006 NissanForums.Com