i have a 93 sentra, with a 1.6 ga16de engine just got done doing a major tune -up, plugs, cap, rotor, wires, fuel filter, air filter, pvc, oxy sensor, ect... now i want to make sure the timming is on but my manual dosent describe much on the timming marks, i found the pointer and also found six marks on the crankshaft pully, now i know that it should be 10 btc, but which mark is 10? from what i gather each mark is 5 degrees?, -5 , +5, +10, +15, +20, also if im standing down on the pully side, it should be the fourth mark from the front of the car, and the third mark from the back of the car? does anyone know for sure? the car is running just fine but i wanted to check it.
10* BTDC is the 3rd mark from the front of the car, or the 4th from the back of the car as there are 6 slashes you arrive at the same mark. (Don't forget to unplug the TPS.)
__________________
1993 Sentra XE auto (original owner)
2005 NISMO Frontier
Last edited by Centurion : Dec 16th, 2002 at 02:34 PM.
From rear to front 6 Marks total: 5* ATDC, TDC (0*), 5* BTDC, 10* BTDC, 15* BTDC, 20* BTDC
__________________ 1991 Sentra SE - Auto to Manual swap, 15" Rota Subzero's, 205/50 Kuhmo 712's, Tsuru headlight conversion, SE-R front and rear disc brakes, SE-R front and rear swaybars, SE-R throttle body, SE-R rear inner taillights, HS CAI and Header, H&R springs, Koni shortened struts, ES Hyperflex kit, B&M Short Shifter, Autometer gauges.
Last edited by johnand : Dec 16th, 2002 at 02:59 PM.
Linear Mode
